MATTICKS INDUSTRIES, INC.

---

FAN FORCED HEATERS

FOR

HAZARDOUS LOACATIONS

ATEX APPROVED (Directive 94/9EC)

CE II 2 G, EEX d IIA & IIB T3 ZONES 1 & 2

 

---

The heater core is located in an epoxy coated cabinet - 14 gauge cabinet.

Adjustable louvers are standard.

All fasteners are zinc coated for corrosion protection.

Two 14.3mm mounting holes at the top of the heater.

Optional:

Built in thermostat.

Both single and three phase voltages are available

Single Phase 50 HZ :

MODEL	KW	VOLTS	PHASE	AMPS	BTU PER HOUR
FE1-220150-025	2.5	220	1	11.4	8,550
FE1-220150-063	6.3	220	1	28.6	21,500
FE1-220150-126	12.6	220	1	57.3	43,000

Three Phase 50 HZ:

MODEL	KW	VOLTS	PHASE	AMPS	BTU PER HOUR
FE1-380350-025	2.5	380	3	3.8	8,550
FE1-380350-063	6.3	380	3	9.6	21,500
FE1-380350-125	12.6	380	3	19.0	43,000

Specifications 50HZ:

UNIT	MAX. ALTITUDE IN FT	CFM DEL @ 70degF	MOTOR HP/RPM	UNIT DIMENSIONS	NET/ SHIP WEIGHT
2.5KW	12,000	400	1437	18.5" H x 24.6" W x 24.6" D	131/180 LBS
6.3KW	10,000	700	1437	18.5" H x 24.6" W x 24.6" D	131/180 LBS
12.6KW	10,000	1,450	1437	22.5" H x 28.6" W x 24.6" D	153/202 LBS

 

---

Mounting Braces Optional: